There are several methods that can be adopted for palm broomstick carpets. Wet cleaning methods are, however, used more commonly. As a matter of fact, professional cleaning companies have recently come up with a technique that involves low moisture levels. This cleaning technique is known as dry-cleaning or chem-dry cleaning.
The chem-dry cleaning method is done with dry foam or dry chemicals. This technique usually works well on carpets used in high traffic areas, where wet cleaning might create a problem. Additionally, this technique is used specifically with deep cleaning.
The process is preceded by a pre-cleaning process wherein the carpet is cleaned for existing heavy soiling and grit with a pre-conditioner. Thereafter, the carpet is dusted with chemicals that are worked in by vigorous and repeated brushing using a brushing machine.
The carpet is then left to dry for about an hour, followed by deep vacuuming to extract the dirt suspended by chemical.
As this carpet cleaning method uses less water, it hardly takes any time to dry the carpet. In fact, it is quite possible to walk over the carpet right after the cleaning process.
Since the water is just sprinkled in little quantities, this cleaning technique prevents the carpet from getting too wet.
With zero use of detergent and negligible amounts of water, this carpet cleaning technique does not leave behind any mold or residue. There is no risk of germ incubation, as no liquid is involved in the process.
Most professional carpet cleaning companies use chemicals that are completely organic. These chemicals are toxin-free and thus safe for pets and humans. Moreover, use of these cleaning agents doesn’t affect people suffering from asthma and allergies.
The chem-dry cleaning method is quite effective, as it provides deep cleansing of your carpet without making a mess or leaving behind residues. There are certain precautionary factors that should be considered during the process. Primarily, it is very important the technician is trained about the cleaning agent and equipment involved in the process.
Furthermore, the dry foam machine should be used with the flow or grain of the pile, if any. This might require turning the machine off and then going back to the initial edge to foam an adjoining area in flowing direction. Also, make sure the foam is completely dry before it is vacuumed. If the technician is not trained, desired results might not be achieved.